SuperTEK 7 Wing Drill



TSTF5.5-73-7

Nominal Dimesions: 5.5 x 73.0

Purpose: When timber is being fastened to thicker steel section or where extremely hard steels defeat normal tek screws

Head style: Double countersunk

Material Grade: AISI C1022

Coating: 1000hr Evoshield®

Drill Point: Tek 7 spiral point

Thread Form: Twin, 24 threads per inch fine thread ‘V’ fluted

Drilling Capacity: 4.0 – 18.0mm

Recommended Drill Speed: 1500-2500 RPM

TSTF5.5-93-7

Nominal Dimesions: 5.5 x 93.0

Purpose: When timber is being fastened to thicker steel section or where extremely hard steels defeat normal tek screws

Head style: Double countersunk

Material Grade: AISI C1022

Coating: 1000hr Evoshield®

Drill Point: Tek 7 spiral point

Thread Form: Twin, 24 threads per inch fine thread ‘V’ fluted

Drilling Capacity: 4.0 – 18.0mm

Recommended Drill Speed: 1500-2500 RPM

TSTF5.5-118-7

Nominal Dimesions: 5.5 x 118.0

Purpose: When timber is being fastened to thicker steel section or where extremely hard steels defeat normal tek screws

Head style: Double countersunk

Material Grade: AISI C1022

Coating: 1000hr Evoshield®

Drill Point: Tek 7 spiral point

Thread Form: Twin, 24 threads per inch fine thread ‘V’ fluted

Drilling Capacity: 4.0 – 18.0mm

Recommended Drill Speed: 1500-2500 RPM

TSTF5.5-143-7

Nominal Dimesions: 5.5 x 143.0

Purpose: When timber is being fastened to thicker steel section or where extremely hard steels defeat normal tek screws

Head style: Double countersunk

Material Grade: AISI C1022

Coating: 1000hr Evoshield®

Drill Point: Tek 7 spiral point

Thread Form: Twin, 24 threads per inch fine thread ‘V’ fluted

Drilling Capacity: 4.0 – 18.0mm

Recommended Drill Speed: 1500-2500 RPM

Datasheet

Technical Drawing

Further Information

Evolution fasteners
Copyright 2019
All rights reserved

Sales Office

Units 2A & 2B
Clyde Gateway Trade Park
Dalmarnock Road, Rutherglen
Glasgow, G73 1AN